AFTERCARESimple maintenance protects performance.
Replacement timing depends on the system, water quality and household usage. Keeping service records makes future support faster and more accurate. There is no universal interval, and a figure quoted without reference to your configuration is not one to plan against: ask for the intervals for the equipment you actually had installed.
- Intervals follow the configuration, not a general rule
- Household demand changes how fast media is consumed
- Keep the record of what was installed and when
WHY IT MATTERSAn unmaintained system stops doing what it was bought for
This is the part homeowners most often underestimate. Filtration media is consumable by design: once it is exhausted, water passes through much as it would have without it, and nothing visibly fails to tell you so. A softener that runs out of salt stops exchanging hardness. The system looks the same, the taps work, and the complaint the system was bought to fix quietly comes back. Maintenance is not protecting the equipment; it is protecting the result.
- Exhausted media does not announce itself
- A softener without salt stops softening
- The complaint returns before anything looks broken
WHAT NEEDS ATTENTIONWhat each kind of system asks of you
Filtration media is replaced periodically, on an interval set by the configuration and by how much water the household puts through it. A salt-based softener needs its salt kept topped up and its resin checked over time. A reverse osmosis system has pre- and post-filters changed relatively often and a membrane that lasts considerably longer. If you have more than one of these, they are on different cycles, which is the usual reason a written schedule is more useful than memory.
- Filtration: media replaced on its own interval
- Softener: salt topped up, resin checked over time
- Reverse osmosis: filters often, membrane rarely
- Multiple systems run on different cycles
Filter replacements →Maintenance guide →
WHEN TO CALL USWhat to check before requesting a visit
Some changes have a straightforward explanation worth ruling out first, and the troubleshooting page sets out what to observe. Anything involving a leak, a pressurised housing or electrical equipment is not a homeowner task: observe, isolate the water only if it is safe and you know the correct shut-off, and report it.
- Observe and describe rather than dismantle
- Never open a pressurised housing
- Report leaks rather than investigating them
What to check first →Request service →
FAQHow often do filters need changing?
It depends on the equipment installed, the stages in your configuration and how much water your household uses, so there is no general answer worth planning against. Ask for the intervals for your system; if you no longer have the original schedule, contact support and we can check the installation record.
FAQHow do I know my system is still working?
Usually by the complaint it was installed to fix starting to return: a taste or smell coming back, soap lathering less well, deposit reappearing on fixtures. Exhausted media does not fail visibly, which is why the schedule matters more than waiting for a symptom.
FAQCan I replace filters myself?
That depends on the configuration and on the housing. Some are straightforward; others are pressurised and should not be opened. Ask us which yours is before attempting it, and never open a housing you are unsure about.